Quick Delivery ( 1 week ) on all stock finishes!!!
1" Rope Pull with pewter urn finial
This page incorporates all items necessary to make your own decorative handle pull. Various tubing designs, brackets, end caps ,finials and finishes are available to assemble in to your dream piece of hardware. All tubing, brackets and caps are made out of brass. Select each item, choose a size, decide on a finish, choose assembled or unassembled and "voila"!!.
Step ( 1 ) One.
Choose a decorative tube design and tube diameter :
Design Smooth- more contemporary in design, easy to clean. Rope- more traditional in design, slightly more difficult to clean, but not deeply groved. Reed- Can be used in both traditional and contemporary. More difficult to clean due to the deeper recesses.
Tube Diameters 1"- Appropriate size for appliance pulls, shower door pulls, furniture, some large kitchen cabinets and smaller doors.
1 3/16"- Appropriate for medium to larger doors, long appliances, tall shower doors, and any area where an important piece is called for.
1" and 1 3/16" Tubing Available in Smooth, Rope and Reeded.
Stock Finishes Available are: Polished Brass Antique Brass Oil Rubbed Bronze Satin Nickel Polished Chrome Custom finishes upon request
Step ( 2 ) Two:
Choose an over all length of tube:
Kitchen cabinets: 6"-12" Furniture: 6"-24" Appliances:-12"-30" Shower doors: 9"-24" Front and Entry doors: 18"-30"
Make your own:
Appliance Pulls, Shower Door Handles, Front Door Handles, Office Pulls, Hotel Pulls, Refrigerator Pulls, Armoire Hardware, Furniture Handles,Kitchen cabinet Hardware, Cabinet Knobs, Eco Green Cabinet Hardware.
Step ( 3 ) Three:
Add Brackets in a specific finish. Decide what center to center measurement they will be placed.
We Suggest: 6" C/C for shower doors 8" C/C for shower doors 3" off each edge on center. Holes can be placed anywhere along the tube length.
Threading is 3/8-16 and can be reduced to 1/4-20
Oil Rubbed Bronze Bracket has the radiused front to wrap around both tube diameters.
Step ( 4 ) Four:
Add a 1" or 1 3/16" cap.
No Hole: To give your pull a clean, finished look. OR With Hole: Choose this to be able to add finials to your pull.
Step ( 5 ) Five:
Add a Pair of Finials if Desired.
Usually placed on both sides of pull for balance. One can be ordered if desired. Finials can be mixed on a pull.
1/2" Ball- Tends to be more towards the contemporary ( modern ) . 1" Ball- As above but more of a statement. 1 1/4" Urn- adds a traditional touch to your pull. Watch out for children if used on bottom.!! Tassel 1 5/8"H x 3/4" W - Traditional addition. Use on both sides or bottom only with urn or ball on top. Bullet- 1 1/4" H x 5/8"W - Your choice on style.
1 1/4" H x 3/4" W brass tassel
Pull Shown with tassel finial
1 3/16" Pull shown with 1" Ball
Finials add a little pizzazzzzzz!!!!
1 1/4" Urn to add to custom pull
Pull with Bullet finial
1" Rope pull with urns in satin nickel and urn in pewter.
Copy and paste your selection to the comment form below. Add your center to center requirements and overall size in the comment section below. Center to center holes included in price. Any size up to 12" included in these prices. Every Foot Of Tubing is charged at the dollar /foot below times the amount of feet. Therefore, an example would be: 28" of 1"smooth tubing will run $105.00.
1" Smooth x up to 12" OD $35.00 antique brass, satin nickel, oil rubbed bronze, pol. brass, chrome 1" Rope x up to 12" OD $37.00 antique brass, satin nickel, oil rubbed bronze, pol. brass, chrome 1" Reed x up to 12" OD $37.00 antique brass, satin nickel, oil rubbed bronze, pol. brass, chrome
1 3/16" Smooth Not Available antique brass, satin nickel, oil rubbed bronze, pol. brass, chrome 1 3/16" Rope x up to 12" OD $40.00antique brass, satin nickel, oil rubbed bronze, pol. brass, chrome 1 3/16" Reed x up to 12" OD $40.00antique brass, satin nickel, oil rubbed bronze, pol. brass, chrome
Deco Brackets 1 1/2" long( ADA approved) x 7/8" Diameter
1-Pair 1 3/16" Caps With Hole Polished Brass 1-Pair 1 3/16" Caps With Hole Antique Brass 1-Pair 1 3/16" Caps With Hole Oil Rubbed Bronze 1-Pair 1 3/16" Caps With Hole Satin Nickel 1-Pair 1 3/16" Caps With Hole Polished Chrome
Finials All Standard Finishes are included in this pricing. antique brass, satin nickel, oil rubbed bronze, polished brass, polished chrome. When requesting installation, these pieces will be bolted and glued in.
1-Tassel $14.00 1-Pr. Tassels $28.00
1- 1/2" ball $11.00 1-Pr. 1/2" Balls $21.00
1- 1" Ball $15.50 1-Pr. 1" Balls $30.00
1-Urn $14.00 1-Pr. Urns $28.00
1- Bullet $14.00 1- Pr. Bullets $28.00
We will take all of your selections above and assemble them into a beautiful, working pull. This price includes: Attaching of brackets, gluing of caps, attachment of any finials, waxing with paste wax. Please copy and paste this: 1- assembly charge $40.00
Back To Back Mount Charge
If you want two ( 2 ) pulls mounted together, please order a pull with threaded brackets and one with set screw brackets and order the B/B Charge which will include mounting hardware to marry the ( 2) pulls together. Please supply the door thickness and type of door. ( i.e. glass, wood) 1-Pair ( two pulls together) back/back charge $20.00
ORDER ENTRY BOX
Step Six ( 6 ).
How To Order
Copy and paste or type in all your selections into the order box below . We will confirm your order via email that day. and once we're confident of your needs, request total payment through the "Paypal Area". This assures you and Custom Made Door hardware. Com that your exact needs are met. Our intention is to ship out all orders within a week, if not sooner. We ship and insure via UPS. Shipping is additional.
Please place your order above. We will then confirm pricing and receipt of order and then email complete price with UPS charges. Please then pay the total amount of purchase using this paypal donation button, ( below) after confirmation. This will insure accurate orders.
Warranty and Maintenance: Please be aware that these products are made mostly from brass. Brass and plated finishes must be maintained by waxing and wiping with products such as car wax ( meguiars) or a paste wax ( butchers) to maintain the finish life. You should do this as if it was a car. We suggest you wax every month or two, and certainly once a month if used outdoors. Custom Made Door Hardware.Com offers a one year limited warranty on all stock finishes as long as the maintenance we suggest here, is adhered to.